Cuckoo Clock Setup Instructions - Text from Bavarian Clock Works
CUCKOO CLOCK SET UP: 1. Hang the clock level on the wall using an anchor rated for 50lbs or more. See anchoring your cuckoo clock in section below. 2. Carefully unwrap the chains underneath the clock and lower them to the floor so they are hanging free of one another 3. Unlatch the cuckoo door 4. Hang the pendulum on the clock, attach the weights, then wind the clock by pulling each weight up to the base of the clock. 5. Push the pendulum to one side or the other and release it to start the clock. 6. To confirm that your cuckoo clock is operating correctly advance the minute hand clockwise to the nearest hour or half hour and listen for the cuckoo and music for musical clocks. Be sure to let the cuckoo and music run its full cycle before advance the minute hand again. You can repeat th...